10 Inch Stout Narrow-base Bobbin Candle Holders

$18.00

Clear

Product Description

This elegant large bobbin candle holder can hold a standard candle. At 10 inches tall, the bottom is about 3.5 inches wide and top is slightly narrower with a 1/2 inch centre bore. Both the top and bottom are banded in zinc metal.

This bobbin is very similar to our other Narrow Base Bobbins, but the spindle is considerably thicker, giving the bobbin a more stout appearance.

Rescued from old textile mills across North America, these bobbins collected plenty of character over their years of hard use. Open in the middle to hold a large candle (3/4 inch base), they are available as either lightly refinished or in their original patina.

The light finishing includes a light sanding of the wood (leaving many of the scuffed marks), slight polishing of the metal banding and removal of most of the paint from the ends. The surface is then lightly varnished and waxed to last a new lifetime as a candle holder.

The original patina is slightly darker and may includes a top painted red, green, blue or clear, a few paint smudges, dings from handling and a few cut marks on the spindle from the operator cutting the thread.

These bobbins are available either as-is or drilled for a 7/8 inch standard tapered candle. This top is wide enough to hold a small pillar candle which does not require a drilled hole. If you want this as a collector’s item, then you should order it un-drilled and cut the base of your candle to fit the hole in the centre of the bobbin. If you are ordering it as a candle holder, then we will drill a larger hole for you and install a brass insert. Drilling the bobbin will reduce its value as a collector’s item.

No two bobbins are exactly alike, but their variations are what makes them so interesting. If you are purchasing multiple bobbins, we recommend that you purchase the lightly finished version as the patina will be more consistent. Different sized bobbins may have been handled and stored quite differently and the original patina can vary from light to quite dark.  If you purchase multiple bobbins of a single type. we will try to match the patina as closely as possible.

This narrow bobbin candle holder is sold singly but works very well in a set of two or three of various sizes.

Additional Information

Weight 0.75 lbs
Dimensions 11 x 4 x 4 in
Finish

Light Finish, Original Patina

Top Colour

Blue, Green, None, Red

Drilled for Candle

Drilled for 7/8 inch candle base, Un-drilled

Reviews

There are no reviews yet.

Be the first to review “10 Inch Stout Narrow-base Bobbin Candle Holders”

Welcome to Whistler Woodcraft